论文范文《浅析绝缘耐压试验》写易过

作者:
更新时间:

<p class=“MsoNormal”><span style=“font-weight: bold;”><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:
"Times New Roman";mso-hansi-font-family:"Times New Roman"”>摘</span><span lang=“EN-US” style=“font-size:14.0pt”><span style=“mso-spacerun:yes”>  </span></span><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>要</span></span><span style=“font-size:
14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>:电气设备的试验直接关系到设备的安全和人员的安全,只有正确地进行电气设备试验,才能保证电气设备的正常运行,保证电网运行安全,保证人民生命财产不受损失。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal”><br></p><p class=“MsoNormal”><span lang=“EN-US” style=“font-size:12.0pt”><o:p> </o:p></span></p><p style=“text-align: center”>
<img src=“/image/image?path=group8/M01/22/CD/wKgIO2GggWmAZowOAACNyRnwLQ4702.jpg”></p><p class=“MsoNormal”><span lang=“EN-US” style=“font-size:14.0pt”><span style=“mso-spacerun:yes”>     </span></span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>绝缘耐压试验的主要特点试验时加到设备绝缘上的电压远高于设备正常运行时绝缘是所承受的电压,所以时可能会对绝缘造成伤害。耐压试验主要包括交流耐压试验(工频耐压试验)、直流耐压试验和冲击耐压试验。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal”><span style=“font-weight: bold;”><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:
"Times New Roman";mso-hansi-font-family:"Times New Roman"”>一</span><span style=“font-size:14.0pt”> </span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>、工频耐压试验</span></span><b><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></b></p><p class=“MsoNormal” style=“text-indent:28.5pt”><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>工频耐压试验是鉴定电气设备绝缘性能最严格、最有效的直接方法,能有效地发现教危险的集中缺陷,它对判断电气设备是否继续投入运行具有决定性的意义,也是保证设备绝缘水平,避免发生绝缘事故的重要手段。预防性试验的工频耐压试验电压值均比出厂试验电压值低一些,而且对不同的设备应区别对待,主要根据国家标准来决定。国家标准规定在绝缘上施加工频耐压试验电压</span><span lang=“EN-US” style=“font-size:14.0pt”>1</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>分钟,不发生绝缘闪络、击穿或其他异常现象,则认为绝缘是合格的。运行经验表明,能经受住</span><span lang=“EN-US” style=“font-size:14.0pt”>1</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>分钟工频耐压试验的电气设备在运行中一般都能保证安全运行。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“text-indent:28.5pt”><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>所谓工频耐压试验即频率为</span><span lang=“EN-US” style=“font-size:14.0pt”>50Hz</span><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>。进行个频耐压试验时,不允许直接使用电网的工频高压,必须使用专门的工频高压装置。主要有</span><span lang=“EN-US” style=“font-size:14.0pt”>:<o:p></o:p></span></p><p class=“MsoNormal” style=“text-indent:28.5pt”><span lang=“EN-US” style=“font-size:14.0pt”>1</span><span style=“font-size:14.0pt;font-family:
宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman"”>、高压试验变压器</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“text-indent:28.5pt”><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>试验变压器大多为油浸式,在工作原理上与电力变压器没有什么不同,但在工作条件和结构方面则具有一系列特点:(</span><span lang=“EN-US” style=“font-size:14.0pt”>1</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>)由于需要产生工频电压很高,因而要求试验变压器的变比很大,并有很好的绝缘。但因为它们都在高压试验室内工作,不像电力变压器那样会受到雷击和操作过电压的作用,所以试验变压器的绝缘裕度不需要取得太大,但是要求在试验过程中严格防止核限制过电压的出现。(</span><span lang=“EN-US” style=“font-size:14.0pt”>2</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>)试验变压器的容量一般比较小。因为在试验,试品放电或击穿前只下需要供给试品电容电流,如果试品被击穿,保护回路会立即切断电源,不会出现长时间的断了电流。为了满足大多数试品的试验要求,</span><span lang=“EN-US” style=“font-size:14.0pt”>250kv</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>以上试验变压器的高压侧额定电流一般为</span><span lang=“EN-US” style=“font-size:
14.0pt”>1A</span><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:
"Times New Roman";mso-hansi-font-family:"Times New Roman"”>。对于某些特殊试品和特殊试验项目,要求试验变压器的额定电流大于</span><span lang=“EN-US” style=“font-size:14.0pt”>1A</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>。此外用于对绝缘子进行湿闪或污闪试验的试验变压器还有具有较小的漏抗,因为要在绝缘子表面建立起电弧放电过程,变压器能供给</span><span lang=“EN-US” style=“font-size:14.0pt”>5~15A</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>的短路电流。(</span><span lang=“EN-US” style=“font-size:14.0pt”>3</span><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>)由于试验变压器的额定电压很高而容量不大,因而它的油箱本体不大、而其高压套管又长又大。按照高压套管的数量,可将试验变压器分为两种类型,一种是单套管式,另一种是双套管式。单套管试验变压器的额定电压一般不超过</span><span lang=“EN-US” style=“font-size:14.0pt”>250~300kv</span><span style=“font-size:
14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>,而双套管试验变压器的最高额定电压已达</span><span lang=“EN-US” style=“font-size:
14.0pt”>750kv</span><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:
"Times New Roman";mso-hansi-font-family:"Times New Roman"”>。(</span><span lang=“EN-US” style=“font-size:14.0pt”>4</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>)试验变压器连续运行时间不长,不需要有复杂的冷却系统。一般不超过</span><span lang=“EN-US” style=“font-size:14.0pt”>30</span><span style=“font-size:14.0pt;font-family:
宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman"”>秒。(</span><span lang=“EN-US” style=“font-size:14.0pt”>5</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>)与电力相比,试验变压器的漏抗较大,短路电流较小。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:0cm;text-indent:28.5pt;mso-list:l0 level1 lfo1”><!–[if !supportLists]–><span lang=“EN-US” style=“font-size:14.0pt;mso-fareast-font-family:"Times New Roman"”><span style=“mso-list:Ignore”>2、</span></span><!–[endif]–><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>串级试验变压器</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“text-indent:28.0pt”><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>当试验电压要求很高(超过</span><span lang=“EN-US” style=“font-size:14.0pt”>750kv</span><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>),由于变压器的体积和重量近似于输出电压的三次方成正比增加,所以采用单台变压器达到所需要输出电压在设计和制造成本上会有很大的难度,通常的办法是采用串级联接的方式,这在经济上比较合理。最常用串级方式是自耦式联接。串联级数越多,容量利用率越低。所以一般不采用超过</span><span lang=“EN-US” style=“font-size:14.0pt”>3</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>级的方案。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:0cm;text-indent:28.5pt;mso-list:l0 level1 lfo1”><!–[if !supportLists]–><span lang=“EN-US” style=“font-size:14.0pt;mso-fareast-font-family:"Times New Roman"”><span style=“mso-list:Ignore”>3、</span></span><!–[endif]–><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>调压装置</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:.5pt;text-indent:28.0pt;mso-char-indent-count:
2.0”><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>使用试验变压器必须使用合适的调压装置来调整输入输出电压的大小。调压装置有以下几种:(</span><span lang=“EN-US” style=“font-size:14.0pt”>1</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>)自耦式调压器。(</span><span lang=“EN-US” style=“font-size:14.0pt”>2</span><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>)移圈式调压器。(</span><span lang=“EN-US” style=“font-size:14.0pt”>3</span><span style=“font-size:14.0pt;font-family:
宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman"”>)电动发电机组。至于再</span><span lang=“EN-US” style=“font-size:14.0pt”>3</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>种调压原理不再展开赘述。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:.5pt;text-indent:28.0pt;mso-char-indent-count:
2.0”><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>在进行工频耐压试验时要注意以下几个方面的问题:(</span><span lang=“EN-US” style=“font-size:14.0pt”>1</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>)注意各个设备的作用。(</span><span lang=“EN-US” style=“font-size:14.0pt”>2</span><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>)注意容升和谐振现象。(</span><span lang=“EN-US” style=“font-size:14.0pt”>3</span><span style=“font-size:14.0pt;font-family:
宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman"”>)根据相关标准正确选择试验电压。(</span><span lang=“EN-US” style=“font-size:14.0pt”>4</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>)根据试品的电容和试验电压的大小,合理选择试验变压器和调压器。(</span><span lang=“EN-US” style=“font-size:14.0pt”>5</span><span style=“font-size:14.0pt;font-family:
宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman"”>)在工频耐压试验过程中,如果试品突然击穿,回路电流并不一定增大。试品击穿后的回路电流大小取决于回路的阻抗。当试品的电容较大时,例如高压电缆和高压电容器,交流耐压试验所需的试验变压器和调压器的容量就要很大,设备就会很笨重,因而现场试验十分困难。解决这一问题的方法之一就是应用谐振回路来大大减小电源设备的容量。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:.5pt;text-indent:28.0pt;mso-char-indent-count:
2.0”><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>串联谐振耐压试验不仅可以减小电源容量,还有其他一些优点。例如当试品在试验过程中击穿时,和通常的工频耐压相比,击穿点的故障电流将大大减小,因而可以避免试品烧坏。谐振回路是串联谐振,当试验变压器的输出电压达不到试验要求的电压时采用。进行工频耐压试验时,如果试验变压器的容量不够,而输出电压能满足要求,也可以采用并联谐振的办法,即在试品两端并联可调电感来补偿试品的无功功率,此时对变压器的副边绕组电流要求很低。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:.5pt;text-indent:28.0pt;mso-char-indent-count:
2.0”><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>以上着重简述了工频耐压试验,下面再简单说一下直流高压试验和冲击高压试验。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:.5pt;text-indent:28.1pt;mso-char-indent-count:
2.0;mso-list:l1 level1 lfo2”><!–[if !supportLists]–><span style=“font-weight: bold;”><span lang=“EN-US” style=“font-size:14.0pt;mso-bidi-font-family:宋体”><span style=“mso-list:Ignore”>二、</span></span><!–[endif]–><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>直流高压试验</span></span><b><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></b></p><p class=“MsoNormal” style=“text-indent:21.0pt;mso-char-indent-count:1.5”><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>利用直流高压对电气设备进行耐压试验在发动机、电动机、电缆和电容器的预防性试验中应用比较广泛。随着直流输电系统的进一步发展,直流耐压试验可能会更进一步受到重视。直流耐压试验和交流耐压试验相比较主要有以下优点:</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:0cm;text-indent:21.0pt;mso-char-indent-count:
1.5;mso-list:l2 level1 lfo3”><!–[if !supportLists]–><span lang=“EN-US” style=“font-size:14.0pt;mso-fareast-font-family:"Times New Roman"”><span style=“mso-list:Ignore”>1、</span></span><!–[endif]–><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>对绝缘的损伤小。进行直流耐压时,如果引起气隙发生局部放电,放电产生的电荷使气隙中的电场减弱,起到抑制放电的作用。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:0cm;text-indent:21.0pt;mso-char-indent-count:
1.5;mso-list:l2 level1 lfo3”><!–[if !supportLists]–><span lang=“EN-US” style=“font-size:14.0pt;mso-fareast-font-family:"Times New Roman"”><span style=“mso-list:Ignore”>2、</span></span><!–[endif]–><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>可同时测量泄漏电流。可在继续直流耐压的同时,通过测量泄漏电流,更有效的反应绝缘内部的集中性缺陷。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:0cm;text-indent:21.0pt;mso-char-indent-count:
1.5;mso-list:l2 level1 lfo3”><!–[if !supportLists]–><span lang=“EN-US” style=“font-size:14.0pt;mso-fareast-font-family:"Times New Roman"”><span style=“mso-list:Ignore”>3、</span></span><!–[endif]–><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>试验设备轻便。直流耐压时需要电源提供无功,所以对设备的容量要求较低,尤其是对电容大的试品。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:.75pt;mso-para-margin-left:.07gd;
text-indent:29.0pt;mso-char-indent-count:2.07”><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>和交流耐压相比,直流耐压的主要缺点是:由于交流和直流情况下绝缘内部的电压分布不同,直流耐压试验对绝缘的考核不如情况下接近实际情况。另外,直流耐压情况下不易发现交联聚乙烯电缆的某些绝缘缺陷。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal”><span lang=“EN-US” style=“font-size:14.0pt”><span style=“mso-spacerun:yes”>     </span></span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>所以做试验时用直流还是交流有时要权衡利弊。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“margin-left:.5pt;text-indent:28.1pt;mso-char-indent-count:
2.0;mso-list:l1 level1 lfo2”><!–[if !supportLists]–><span style=“font-weight: bold;”><span lang=“EN-US” style=“font-size:14.0pt;mso-bidi-font-family:宋体”><span style=“mso-list:Ignore”>三、</span></span><!–[endif]–><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>冲击高压所以</span></span><b><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></b></p><p class=“MsoNormal” style=“text-indent:21.0pt;mso-char-indent-count:1.5”><span lang=“EN-US” style=“font-size:14.0pt”><span style=“mso-spacerun:yes”> </span></span><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>由于冲击高压试验对试验设备和测试仪器的要求高、投资大,测试技术也比较复杂,所以在绝缘预防性试验中通常不列入冲击耐压试验。但为了研究电气设备在运行中遭受雷电过电压和操作过电压作用时的绝缘性能,在许多高压试验室中都装设了冲击电压发生器,用来产生试验用的雷电冲击电压波和操作冲击电压波。许多高电压电气设备在出厂试验,型式试验时或大修后都必须进行冲击高压试验。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p class=“MsoNormal” style=“text-indent:21.0pt;mso-char-indent-count:1.5”><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>冲击电压发生器是高压实验室</span><span style=“font-size:14.0pt”> </span><span style=“font-size:14.0pt;font-family:
宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman"”>基本设备之一,冲击试验电压要比设备绝缘正常运行时承受的电压高出很多。随着输电电压等级的不断提高,冲击电压发生器的最高电压也要相应提高才能满足试验要求。例如我司协助施工的南京特高压——盱眙站(交流</span><span lang=“EN-US” style=“font-size:14.0pt”>1000kv</span><span style=“font-size:14.0pt;
font-family:宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:
"Times New Roman"”>和直流正负</span><span lang=“EN-US” style=“font-size:14.0pt”>800kv</span><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>)的变压器,电抗器,</span><span lang=“EN-US” style=“font-size:14.0pt”>GIS</span><span style=“font-size:14.0pt;font-family:
宋体;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman"”>等设备的试验都有较严格的要求。</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p><p>

<!–[if gte mso 9]><xml>
<w:WordDocument>
<w:View>Normal</w:View>
<w:Zoom>0</w:Zoom>
<w:TrackMoves/>
<w:TrackFormatting/>
<w:PunctuationKerning/>
<w:DrawingGridVerticalSpacing>7.8 磅</w:DrawingGridVerticalSpacing>
<w:DisplayHorizontalDrawingGridEvery>0</w:DisplayHorizontalDrawingGridEvery>
<w:DisplayVerticalDrawingGridEvery>2</w:DisplayVerticalDrawingGridEvery>
<w:ValidateAgainstSchemas/>
<w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid>
<w:IgnoreMixedContent>false</w:IgnoreMixedContent>
<w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText>
<w:DoNotPromoteQF/>
<w:LidThemeOther>EN-US</w:LidThemeOther>
<w:LidThemeAsian>ZH-CN</w:LidThemeAsian>
<w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript>
<w:Compatibility>
<w:SpaceForUL/>
<w:BalanceSingleByteDoubleByteWidth/>
<w:DoNotLeaveBackslashAlone/>
<w:ULTrailSpace/>
<w:DoNotExpandShiftReturn/>
<w:AdjustLineHeightInTable/>
<w:BreakWrappedTables/>
<w:SnapToGridInCell/>
<w:WrapTextWithPunct/>
<w:UseAsianBreakRules/>
<w:DontGrowAutofit/>
<w:SplitPgBreakAndParaMark/>
<w:DontVertAlignCellWithSp/>
<w:DontBreakConstrainedForcedTables/>
<w:DontVertAlignInTxbx/>
<w:Word11KerningPairs/>
<w:CachedColBalance/>
<w:UseFELayout/>
</w:Compatibility>
<w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel>
<m:mathPr>
<m:mathFont m:val=“Cambria Math”/>
<m:brkBin m:val=“before”/>
<m:brkBinSub m:val=“--”/>
<m:smallFrac m:val=“off”/>
<m:dispDef/>
<m:lMargin m:val=“0”/>
<m:rMargin m:val=“0”/>
<m:defJc m:val=“centerGroup”/>
<m:wrapIndent m:val=“1440”/>
<m:intLim m:val=“subSup”/>
<m:naryLim m:val=“undOvr”/>
</m:mathPr></w:WordDocument>
</xml><![endif]–><!–[if gte mso 9]><xml>
<w:LatentStyles DefLockedState=“false” DefUnhideWhenUsed=“true”
DefSemiHidden=“true” DefQFormat=“false” DefPriority=“99”
LatentStyleCount=“267”>
<w:LsdException Locked=“false” Priority=“0” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Normal”/>
<w:LsdException Locked=“false” Priority=“9” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“heading 1”/>
<w:LsdException Locked=“false” Priority=“9” QFormat=“true” Name=“heading 2”/>
<w:LsdException Locked=“false” Priority=“9” QFormat=“true” Name=“heading 3”/>
<w:LsdException Locked=“false” Priority=“9” QFormat=“true” Name=“heading 4”/>
<w:LsdException Locked=“false” Priority=“9” QFormat=“true” Name=“heading 5”/>
<w:LsdException Locked=“false” Priority=“9” QFormat=“true” Name=“heading 6”/>
<w:LsdException Locked=“false” Priority=“9” QFormat=“true” Name=“heading 7”/>
<w:LsdException Locked=“false” Priority=“9” QFormat=“true” Name=“heading 8”/>
<w:LsdException Locked=“false” Priority=“9” QFormat=“true” Name=“heading 9”/>
<w:LsdException Locked=“false” Priority=“39” Name=“toc 1”/>
<w:LsdException Locked=“false” Priority=“39” Name=“toc 2”/>
<w:LsdException Locked=“false” Priority=“39” Name=“toc 3”/>
<w:LsdException Locked=“false” Priority=“39” Name=“toc 4”/>
<w:LsdException Locked=“false” Priority=“39” Name=“toc 5”/>
<w:LsdException Locked=“false” Priority=“39” Name=“toc 6”/>
<w:LsdException Locked=“false” Priority=“39” Name=“toc 7”/>
<w:LsdException Locked=“false” Priority=“39” Name=“toc 8”/>
<w:LsdException Locked=“false” Priority=“39” Name=“toc 9”/>
<w:LsdException Locked=“false” Priority=“35” QFormat=“true” Name=“caption”/>
<w:LsdException Locked=“false” Priority=“10” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Title”/>
<w:LsdException Locked=“false” Priority=“1” Name=“Default Paragraph Font”/>
<w:LsdException Locked=“false” Priority=“11” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Subtitle”/>
<w:LsdException Locked=“false” Priority=“22” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Strong”/>
<w:LsdException Locked=“false” Priority=“20” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Emphasis”/>
<w:LsdException Locked=“false” Priority=“59” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Table Grid”/>
<w:LsdException Locked=“false” UnhideWhenUsed=“false” Name=“Placeholder Text”/>
<w:LsdException Locked=“false” Priority=“1” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“No Spacing”/>
<w:LsdException Locked=“false” Priority=“60” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Shading”/>
<w:LsdException Locked=“false” Priority=“61” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light List”/>
<w:LsdException Locked=“false” Priority=“62” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Grid”/>
<w:LsdException Locked=“false” Priority=“63” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 1”/>
<w:LsdException Locked=“false” Priority=“64” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 2”/>
<w:LsdException Locked=“false” Priority=“65” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 1”/>
<w:LsdException Locked=“false” Priority=“66” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 2”/>
<w:LsdException Locked=“false” Priority=“67” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 1”/>
<w:LsdException Locked=“false” Priority=“68” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 2”/>
<w:LsdException Locked=“false” Priority=“69” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 3”/>
<w:LsdException Locked=“false” Priority=“70” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Dark List”/>
<w:LsdException Locked=“false” Priority=“71” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Shading”/>
<w:LsdException Locked=“false” Priority=“72” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful List”/>
<w:LsdException Locked=“false” Priority=“73” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Grid”/>
<w:LsdException Locked=“false” Priority=“60” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Shading Accent 1”/>
<w:LsdException Locked=“false” Priority=“61” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light List Accent 1”/>
<w:LsdException Locked=“false” Priority=“62” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Grid Accent 1”/>
<w:LsdException Locked=“false” Priority=“63” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 1 Accent 1”/>
<w:LsdException Locked=“false” Priority=“64” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 2 Accent 1”/>
<w:LsdException Locked=“false” Priority=“65” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 1 Accent 1”/>
<w:LsdException Locked=“false” UnhideWhenUsed=“false” Name=“Revision”/>
<w:LsdException Locked=“false” Priority=“34” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“List Paragraph”/>
<w:LsdException Locked=“false” Priority=“29” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Quote”/>
<w:LsdException Locked=“false” Priority=“30” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Intense Quote”/>
<w:LsdException Locked=“false” Priority=“66” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 2 Accent 1”/>
<w:LsdException Locked=“false” Priority=“67” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 1 Accent 1”/>
<w:LsdException Locked=“false” Priority=“68” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 2 Accent 1”/>
<w:LsdException Locked=“false” Priority=“69” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 3 Accent 1”/>
<w:LsdException Locked=“false” Priority=“70” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Dark List Accent 1”/>
<w:LsdException Locked=“false” Priority=“71” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Shading Accent 1”/>
<w:LsdException Locked=“false” Priority=“72” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful List Accent 1”/>
<w:LsdException Locked=“false” Priority=“73” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Grid Accent 1”/>
<w:LsdException Locked=“false” Priority=“60” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Shading Accent 2”/>
<w:LsdException Locked=“false” Priority=“61” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light List Accent 2”/>
<w:LsdException Locked=“false” Priority=“62” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Grid Accent 2”/>
<w:LsdException Locked=“false” Priority=“63” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 1 Accent 2”/>
<w:LsdException Locked=“false” Priority=“64” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 2 Accent 2”/>
<w:LsdException Locked=“false” Priority=“65” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 1 Accent 2”/>
<w:LsdException Locked=“false” Priority=“66” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 2 Accent 2”/>
<w:LsdException Locked=“false” Priority=“67” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 1 Accent 2”/>
<w:LsdException Locked=“false” Priority=“68” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 2 Accent 2”/>
<w:LsdException Locked=“false” Priority=“69” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 3 Accent 2”/>
<w:LsdException Locked=“false” Priority=“70” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Dark List Accent 2”/>
<w:LsdException Locked=“false” Priority=“71” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Shading Accent 2”/>
<w:LsdException Locked=“false” Priority=“72” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful List Accent 2”/>
<w:LsdException Locked=“false” Priority=“73” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Grid Accent 2”/>
<w:LsdException Locked=“false” Priority=“60” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Shading Accent 3”/>
<w:LsdException Locked=“false” Priority=“61” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light List Accent 3”/>
<w:LsdException Locked=“false” Priority=“62” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Grid Accent 3”/>
<w:LsdException Locked=“false” Priority=“63” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 1 Accent 3”/>
<w:LsdException Locked=“false” Priority=“64” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 2 Accent 3”/>
<w:LsdException Locked=“false” Priority=“65” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 1 Accent 3”/>
<w:LsdException Locked=“false” Priority=“66” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 2 Accent 3”/>
<w:LsdException Locked=“false” Priority=“67” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 1 Accent 3”/>
<w:LsdException Locked=“false” Priority=“68” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 2 Accent 3”/>
<w:LsdException Locked=“false” Priority=“69” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 3 Accent 3”/>
<w:LsdException Locked=“false” Priority=“70” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Dark List Accent 3”/>
<w:LsdException Locked=“false” Priority=“71” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Shading Accent 3”/>
<w:LsdException Locked=“false” Priority=“72” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful List Accent 3”/>
<w:LsdException Locked=“false” Priority=“73” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Grid Accent 3”/>
<w:LsdException Locked=“false” Priority=“60” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Shading Accent 4”/>
<w:LsdException Locked=“false” Priority=“61” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light List Accent 4”/>
<w:LsdException Locked=“false” Priority=“62” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Grid Accent 4”/>
<w:LsdException Locked=“false” Priority=“63” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 1 Accent 4”/>
<w:LsdException Locked=“false” Priority=“64” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 2 Accent 4”/>
<w:LsdException Locked=“false” Priority=“65” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 1 Accent 4”/>
<w:LsdException Locked=“false” Priority=“66” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 2 Accent 4”/>
<w:LsdException Locked=“false” Priority=“67” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 1 Accent 4”/>
<w:LsdException Locked=“false” Priority=“68” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 2 Accent 4”/>
<w:LsdException Locked=“false” Priority=“69” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 3 Accent 4”/>
<w:LsdException Locked=“false” Priority=“70” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Dark List Accent 4”/>
<w:LsdException Locked=“false” Priority=“71” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Shading Accent 4”/>
<w:LsdException Locked=“false” Priority=“72” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful List Accent 4”/>
<w:LsdException Locked=“false” Priority=“73” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Grid Accent 4”/>
<w:LsdException Locked=“false” Priority=“60” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Shading Accent 5”/>
<w:LsdException Locked=“false” Priority=“61” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light List Accent 5”/>
<w:LsdException Locked=“false” Priority=“62” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Grid Accent 5”/>
<w:LsdException Locked=“false” Priority=“63” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 1 Accent 5”/>
<w:LsdException Locked=“false” Priority=“64” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 2 Accent 5”/>
<w:LsdException Locked=“false” Priority=“65” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 1 Accent 5”/>
<w:LsdException Locked=“false” Priority=“66” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 2 Accent 5”/>
<w:LsdException Locked=“false” Priority=“67” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 1 Accent 5”/>
<w:LsdException Locked=“false” Priority=“68” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 2 Accent 5”/>
<w:LsdException Locked=“false” Priority=“69” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 3 Accent 5”/>
<w:LsdException Locked=“false” Priority=“70” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Dark List Accent 5”/>
<w:LsdException Locked=“false” Priority=“71” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Shading Accent 5”/>
<w:LsdException Locked=“false” Priority=“72” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful List Accent 5”/>
<w:LsdException Locked=“false” Priority=“73” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Grid Accent 5”/>
<w:LsdException Locked=“false” Priority=“60” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Shading Accent 6”/>
<w:LsdException Locked=“false” Priority=“61” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light List Accent 6”/>
<w:LsdException Locked=“false” Priority=“62” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Light Grid Accent 6”/>
<w:LsdException Locked=“false” Priority=“63” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 1 Accent 6”/>
<w:LsdException Locked=“false” Priority=“64” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Shading 2 Accent 6”/>
<w:LsdException Locked=“false” Priority=“65” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 1 Accent 6”/>
<w:LsdException Locked=“false” Priority=“66” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium List 2 Accent 6”/>
<w:LsdException Locked=“false” Priority=“67” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 1 Accent 6”/>
<w:LsdException Locked=“false” Priority=“68” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 2 Accent 6”/>
<w:LsdException Locked=“false” Priority=“69” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Medium Grid 3 Accent 6”/>
<w:LsdException Locked=“false” Priority=“70” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Dark List Accent 6”/>
<w:LsdException Locked=“false” Priority=“71” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Shading Accent 6”/>
<w:LsdException Locked=“false” Priority=“72” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful List Accent 6”/>
<w:LsdException Locked=“false” Priority=“73” SemiHidden=“false”
UnhideWhenUsed=“false” Name=“Colorful Grid Accent 6”/>
<w:LsdException Locked=“false” Priority=“19” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Subtle Emphasis”/>
<w:LsdException Locked=“false” Priority=“21” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Intense Emphasis”/>
<w:LsdException Locked=“false” Priority=“31” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Subtle Reference”/>
<w:LsdException Locked=“false” Priority=“32” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Intense Reference”/>
<w:LsdException Locked=“false” Priority=“33” SemiHidden=“false”
UnhideWhenUsed=“false” QFormat=“true” Name=“Book Title”/>
<w:LsdException Locked=“false” Priority=“37” Name=“Bibliography”/>
<w:LsdException Locked=“false” Priority=“39” QFormat=“true” Name=“TOC Heading”/>
</w:LatentStyles>
</xml><![endif]–>

<!–[if gte mso 10]>
<style>
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:普通表格;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:“”;
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:“Times New Roman”,“serif”;}
</style>
<![endif]–>

</p><p class=“MsoNormal” style=“text-indent:21.0pt;mso-char-indent-count:1.5”><span style=“font-size:14.0pt;font-family:宋体;mso-ascii-font-family:"Times New Roman";
mso-hansi-font-family:"Times New Roman"”>本文结束时有必要再提醒一下,无论做何种试验一定不要忘了“安全”二字,人的安全是最重要的!</span><span lang=“EN-US” style=“font-size:14.0pt”><o:p></o:p></span></p>